LEYBONOL LVO 700 2 litre
L70002
0
1 Trả lời
0
Câu trả lời hay nhất
speedwave XPERT - Microwave Pressure Digestion System Sample Preparation at the Highest Level
DAK 100 / CX 100
| Order number | Name |
|---|---|
| 819-5004780-0 | Cap for CX 100-vessel with pressure control |
| 419-5304707-0 | Cap insert for closure caps CX 100 with pressure control (RPM) |
| 819-5004720-0 | CX 100 Vessel complete |
| 819-10000002-0 | CX 100 Vessel complete RPM |
| 819-5304763-0 | Cap insert for closure caps CX-100 with pressure control (OPC) |
| 819-5303277-0 | Enlargement insert CX 100 |
| 819-5303386-0 | Forming System 6-fold CX 100 |
| 419-5304882-0 | CX 100 Glass-Ring for closure caps CX 100 with pressure control (RPM) |
| 419-5308060-0 | Lid for CX 100 made of TFM, set of 5 pieces |
| 419-5303287-0 | CX 100 Liner insert for pressure vessel CX 100 made of TFM, 100 ml, 100 bar |
| 419-5303296-0 | PEEK-Rung nut for CX 100 closure cap |
| 419-5308040-0 | Rupture disc for CX 100 made of Titanium, 100 bar, set of 10 pieces |
| 419-5004740-0 | Screw cap for CX 100 without pressure measurement |
| 819-5004730-0 | Set caps for CX 100-vessels without pressure control |
| 819-5004790-0 | Set caps for CX 100-vessels with pressure control |
| 419-10000013-0 | tool kit CX-100 RPM-screw caps |
| 419-5003279-0 | CX 100 Vessel bottom made of TFM |
| 419-5302817-0 | CX 100 Blind plug for turntable to seal the gas collection system |
| 819-5303955-0 | Consumables CX 100 for vessels without pressure control |
| 819-5303965-0 | Consumables set CX100 for vessel with pressure control |
| 419-5303284-0 | CX 100 ceramic pressure jacket (white-new) |
| 419-5303825-0 | Evaporation unit CX 100 evaporation lid |
DAP 100 / PL 100
| Order number | Name |
|---|---|
| 819-5303299-0 | Enlargement insert PL 100 |
| 819-5303275-0 | Forming System 6-fold PL 100 |
| 419-5300005-0 | Lid for PL 100 made of TFM, set of 5 pieces |
| 819-5003630-0 | PL 100 Vessel complete |
| 819-5003632-0 | PL 100 Vessel complete RPM |
| 419-5014616-0 | Rupture disc standard PH 30 and PL 100, set of 25 pieces |
| 419-5046170-0 | PL 100 Special lid with integrated TFM rupture disc for PL 100 |
| 419-5003672-0 | PL 100 Vessel bottom made of TFM |
| 819-5303953-0 | Consumables PL 100 |
DAP 60 / PM 60
| Order number | Name |
|---|---|
| 419-5303740-0 | Rupture disc Special for PM 60 vessels, 50 bar, stainless steel (SS316), set of 20 pieces |
| 819-5303278-0 | Enlargement insert PM 60 |
| 819-5303385-0 | Forming System 6-fold PM 60 |
| 419-5014617-0 | Lid for PM 60 made of TFM, set of 5 pieces |
| 819-5003560-0 | PM 60 Vessel complete |
| 819-5003559-0 | PM 60 Vessel complete RPM |
| 419-5303065-0 | Rupture disc Special PM 60 (reinforced), set of 25 pieces |
| 419-5046180-0 | Special lid with integrated TFM rupture disc for PM 60 |
| 419-5003603-0 | Vessel bottom PM 60 made of TFM |
| 819-5303952-0 | Consumables PM 60 |
General consumables / various vessel types
| Order number | Name |
|---|---|
| 819-5003580-0 | Cap for vessels with pressure control |
| 419-5303567-0 | Cap insert for closure caps with pressure control (RPM) |
| 419-5302963-0 | Fixation screw for lip seal ring |
| 819-5303245-0 | Forming system TOPwave |
| 419-5303573-0 | Prisma RPM Glass prism for closure caps with pressure control (RPM) |
| 419-5004110-0 | Knurled nut for exhaust tube of gas collection system |
| 419-5302962-0 | Lip-seal ring for the gas collection system |
| 419-5014622-0 | Marble granulate for evaporation unit |
| 419-5304101-0 | O-Ring RPM (Viton) |
| 419-5303588-0 | Polarisation foil for prism RPM, set of 24 pieces |
| 419-5303571-0 | Knurled screw for closure caps with pressure control (RPM) for PH30/PM60/PL100 |
| 819-5003540-0 | Set caps for vessels without pressure control |
| 819-5003590-0 | Set caps for vessels with pressure control |
| 419-5303227-0 | Vent-tube set 2 m |
| 419-5303537-0 | Vent-tube set 4 m |
| 419-5303508-0 | Connecting tube to gas collection system / integrated suction system (without nut) |
| 419-5303612-0 | Weighing cup (2.0 ml, Set of 12 pieces) |
| 419-5303566-0 | connection fitting for L100, PM60 |
| 419-5302811-0 | Nut for connecting tube to gas collection system/integrated suction system |
| 819-5005055 | Neutralisation Unit - for neutralisation of fumes |
| 419-5303563-0 | Cap without pressure control for PH 30 / PM 60 / PL 100 vessel made of TFM |
Liner Systems / Inserts
| Order number | Name |
|---|---|
| 419-5303283-0 | CX 17 Insert made of TFM, 17 ml |
| 419-5303282-0 | CX 17 pressure jacket |
| 419-5303428-0 | CX 17 Spacer ring made of PTFE |
| 419-5303485-0 | CX 17 Lid for CX 17 made of TFM, set of 4 pieces |
| 419-5014420-0 | Lid for QX 20 / QX 22 made of TFM, set of 10 pieces |
| 419-5014414-0 | Lid for QX 20 / QX 22 made of TFM, set of 4 pieces |
| 419-5303389-0 | PTFE Adapter piece CX 17 in PL 100 |
| 419-5014433-0 | QX 20 Centring sleeve made of PTFE |
| 419-5014410-0 | Rupture disc for QX 20 / QX 22 made of Monel, 100 bar, set of 5 pieces |
PM 40 / PH 30 (TOPwave)
| Order number | Name |
|---|---|
| 819-5003790-0 | Cap for PM 40 vessel with pressure control |
| 419-5303433-0 | PM 40 Cap without pressure control for PM 40 vessel made of TFM |
| 819-5303661-0 | Enlargement insert PH 30 |
| 419-5709024-0 | Lid for PH 30 made of TFM, set of 10 pieces |
| 419-5306386-0 | O-Ring RPM 25 x 3 mm for closure caps with PM 40 pressure control (RPM) |
| 419-5303446-0 | Lid for PM 40 made of TFM, set of 10 pieces |
| 819-5003270-0 | PM 40 Vessel complete |
| 419-5303445-0 | Rupture disc for PM 40 made of aluminium, 40 bar, set of 25 pieces |
| 419-5003605-0 | Vessel bottom PH 30 made of TFM |
| 419-5003447-0 | Vessel bottom PM 40 made of TFM |
| 819-5303448-0 | Consumables PM 40 |
3
Bình luận
CP
-
Rupture discs 40 bar Code: 5014616 Bộ 25 cái
TFM lids set Code: 5302020 Bộ/5
Phụ tùng cho máy HPLC Agilent, 5042-6500
Phụ tùng cho máy HPLC Agilent, 0890-1761
Phụ tùng cho máy HPLC Agilent, 5180-4114
Phụ tùng cho máy HPLC Agilent, 5180-4108
Phụ tùng cho máy sắc ký lòng cao áp Shimadzu 40D (UHPLC) 228-53184-91
CP
-
Double winged 2 pc fitting 1/16in, 10/Pk, 58 Unit(s) 1 AT-5042-6500
1/16in od 0.02in id 0.5mm PEEK tubing, 58 Unit(s) 1 AT-0890-1761
Back ferrules, 1/16in SS, 10/Pk, 58 Unit(s) 1 AT-5180-4114
Front ferrules, 1/16in SS, 10/Pk, 58 Unit(s) 1 AT-5180-4108
Shimadzu, SUU PIPE, ID 0.1X600 Unit(s) 1 SI-228-53184-91
Berghof speedwave 2, Lid for PM 60 made of TFM, set of 5 pieces Unit(s) 1 BF-5302020
Rupture disc standard PH 30 and PL 100, set of 25 pieces Unit(s) 1 BF-5014616
CP
-
Eclipse Plus C18 Grd,4.6x12.5mm,5um,4pk, BC Unit(s) 1 AT-820950-936
Eclipse Plus C18, 4.6x250mm,5um, BC Unit(s) 1 AT-959990-902
Leybold Vacuum Products Inc Leybonol LVO 700 Synthetic Cyclic Hydrocarbon, 2 L
Supplier: Leybold Vacuum Products Inc L70002
[THERMO-26066-1540] Dioxin polar confirmation column, temperature stable, TGDioxin 60m x 0.25mm x 0.25um
G1312-68741 Preventive Maintenance Kit for 1260 Infinity/Infinity II Binary Pump. G1310-68742 seal wash PM kit G1312-60020 AIV cartridge 600 bar G1312-60027 outlet valve G7129-68740 PM kit for G7128AIC 2140-0820 Infinitylab long-life deterium DADIMWWD LAMP
MÁY LY TÂM 5 - 15KG CÓ BIẾN TẦN : 01 cái
- Thương hiệu: VinaOrganic
- Model: LT3827
- Kích thước máy (LxWxH): 860x650x560mm
- Kích thước lồng (ØxH): Ø380xH270mm
- Điện áp sử dụng: 220V/50Hz
- Công suất động cơ: 2Hp
- Hộp biến tần điều chỉnh tốc độ: Có
- Khung, đế, đáy bằng gang chịu lực; lồng, vỏ bằng inox 304;
Thermo Scientific™
HyperSep™ SCX Cartridges
Catalog number: 60108-858
5 #L Syringe Metal Plunger w/ PTFE Seal N6101390
KIT MS 9MM SCREW VIAL ULB SEPTA 100PK N9310064
V/G, 1/16" Std Ferrule, 0.4mm ID, 10pk 09920104
PKI Green Injection Port Septa, Pkg. 50 N6621028
Quartz Liner for Spit Operation, 2 mm ID N6121004
O-Ring 9.32 OD x 5.32 ID 09921004
Hydrocarbon Trap, 1/8 Fittings N9301192
Moisture Trap, 70 mL 1/8 Fittings N9301193
M1000 Oxygen Trap, 1/8 Fittings N9301179
Vial Diffuser Molding N6101276
4 mL Clr Scr Vial 15 x 45 13-425 PER PC. 09923031
Hydrogen Generator Deionizer LE Bag N9307097
[AT-12103101] ABS Elut-NEXUS, 60mg 3mL, 100/PK, 9P
Product
[AT-5982-5650] QuEChERS Extract Tubes, EN Method, 9P
[AT-5982-5156] Dispersive SPE 15ml, Fatty Samples, EN, 9P
Product
[AT-820999-901] High Perf. ZORBAX Guard Fittings Kit, BC
[AT-5185-5863] Blue screw cap,PTFE/sil septa,500pk, 58
[AT-G1329-87300] SST capillary 90cm, 0.17mm id, 1/16 fitt, AA
[AT-5183-4712] Lnr,gen purp split/spltls,tpr,GW, 5/PK, 58
[AT-RMSH-2] Big Universal Trap, 1/8inch fttgs,Helium, 58
Product
[AT-0100-2144] 1/8inch Ball Valve, 58
[AT-RMSN-4] Big Universal Trap, 1/4i fttgs, Nitrogen, 58
[AT-G1316-87300] Capillary, 0.17x90mm 1/16 in male/male, AA
[AT-01090-87611] Capillary ST 105 X 0.12mm S/S, AA
[AT-963954-302] Eclipse XDB-C18 Solv Save 3.5u,3.0x150mm, BC
[AT-G7005-60061] Filament,high temperature EI for GCMS, AA
[AT-G7005-60061] Filament,high temperature EI for GCMS, AA
[AT-5190-6144] Gold Seal, Ultra Inert, w/Washer, AA
[AT-5080-8750] Fittings 1/8inch Brass 20/PK, 58
[AT-5190-9007] LCMS PM Kit, ESI, MS40+ RP, 58
[AT-5188-6496] QuickPick Split Vent + Inlet PM Kit, AA
[AT-5182-0731] Septa, PTFE/red silicone, 8.7mm 100/pk, 58
[AT-1460-2571] Canted coil spring, AA
[AT-G1960-67100] Universal Inlet Filter Replacement Kit, AA
[AT-5182-0553] Screw cap and clear vial kit 100/PK, 58
[AT-8010-0418] 18mm hdsp septa PTFE/silicone 1000/pk, 58
[AT-G1969-85000] ESI-L Low Concentration Tuning Mix 100ml, AA
[AT-AVF60M] Agilent Avf60m Mineral Oil for Rotary Vane Vacuum PUMPS 1qt / 1 Liter
Product
[G20163-15173] ChraPart #G20163-15173, alternative to Agilent part# 5181-1267, 10µL Standard Syringe, Fixed Needle, 23-26 Gauge
[G20163-CA11421] ChraPart #G20163-CA11421, alternative to part# 228-35871-96, Line Filter Assembly, Comparable to OEM # 228-35871-96,
[G20163-C10722] ChraPart #G20163-C10722, alternative to part# G1313-68709, Autosampler Preventative Maintenance Kit, Comparable to OEM # G1313-68709,
[G20163-C21169] ChraPart #G20163-C21169, alternative to part# G1316-87300, Assy, Capillary, 90mm x 0.17mm ID, w/Fittings, Comparable to OEM # G1316-87300,
[C5181-8830] ChraPart #C5181-8830, Column nut, universal 2/PK, alternative to Agilent part 5181-8830
[C5062-3514] ChraPart #C5062-3514, Ferrule, 0.5mm VG 0.32 col 10/PK, alternative to Agilent part 5062-3514
[G20163-C11240] ChraPart #G20163-C11240, alternative to part# 5063-6591, ED020005, Fingertight One Piece 10-32 PEEK Male Nut/Ferrule for 1/16", OD Tubing, 10/pk, Comparable to OEM # 5063-6591, ED020005,
[G20163-C10683] ChraPart #G20163-C10683, alternative to part# 01018-22707, PTFE Frits, 5/pk, Comparable to OEM # 01018-22707,
[C670-15003-04] ChraPart #C670-15003-04, alternative to part# 670-15003-04, 15% Graphite/85% Vespel Ferrule with 0.4mm ID hole, 10PK, Comparable to OEM # 670-15003-04
[C5188-5366] ChraPart #C5188-5366, Liner O-Ring, Non-Stick Flip-Top, alternative to Agilent part 5188-5366
[C221-75194] ChraPart #C221-75194, alternative to part# 221-75194, Liner, glass, split/splitless, deactivated, for SPL-2010 plus, 2010, 2025 - Pack of 5, Comparable to OEM # 221-75194
[G20163-14996] ChraPart #G20163-14996 Liner O-Rings alternative to Shimadzu 036-11203-84, O-RING, 5pk
[G20163-C14093] ChraPart #G20163-C14093, alternative to part# G1312-60067, Outlet Ball Valve (600 bar), Comparable to OEM # G1312-60067,
[G20163-C14101] ChraPart #G20163-C14101, alternative to part# G1312-60066, Passive Inlet Valve, Comparable to OEM # G1312-60066,
[G20163-C14133] ChraPart #G20163-C14133, alternative to part# 228-32628-91, Gold Plunger Seal, Comparable to OEM # 228-32628-91,
[C228-35403] ChraPart #C228-35403, alternative to part# 228-35403-00, PEEK male nut for plumbing line between inlet block and check valve for LC-20AD/AB and LC-10ADvp - Pack of 1, Comparable to OEM # 228-35403-00
[G20163-C11313] ChraPart #G20163-C11313, alternative to part# 228-36923-00, Rotor Seal, LPV, Comparable to OEM # 228-36923-00,
[G20163-C11088] ChraPart #G20163-C11088, alternative to part# 0905-1420, Gold Piston Seals, 2/pk, Comparable to OEM # 0905-1420,
[G20163-C14133] ChraPart #G20163-C14133, alternative to part# 228-32628-91, Gold Plunger Seal, Comparable to OEM # 228-32628-91,
[G20163-C10417] ChraPart #G20163-C10417, alternative to part# 5063-6589, Black Piston Seals, 2/pk, Comparable to OEM # 5063-6589,
[G20163-C14148] ChraPart #G20163-C14148, alternative to part# G1313-68719, PM Kit, G1329B Autosampler, Comparable to OEM # G1313-68719,
[G20163-C14146] ChraPart #G20163-C14146, alternative to part# G1312-68741, PM Kit, G1312 Binary Pump Comparable to OEM # G1312-68741,
[G20163-C21577] ChraPart #G20163-C21577, alternative to part# G1367-68741, PM Kit, G1367E, Comparable to OEM # G1367-68741,
[G20163-C10683] ChraPart #G20163-C10683, alternative to part# 01018-22707, PTFE Frits, 5/pk, Comparable to OEM # 01018-22707,
[G20163-C11313] ChraPart #G20163-C11313, alternative to part# 228-36923-00, Rotor Seal, LPV, Comparable to OEM # 228-36923-00,
[G20163-CA11454] ChraPart #G20163-CA11454, alternative to part# 5067-4728, Seal Cap Assembly, Comparable to OEM # 5067-4728,
[G20163-C10621] ChraPart #G20163-C10621, alternative to part# 0905-1503, Seal, Pump, Comparable to OEM # 0905-1503,
[G20163-C12605] ChraPart #G20163-C12605, alternative to part# G1329-87017, Needle Seat, Std., PEEK&trade, 0.17mm ID, Comparable to OEM # G1329-87017,
[C5183-4761] ChraPart #C5183-4761, Septa Non-Stick Long Life 11mm 50pk, alternative to Agilent part 5183-4761
[C670-11009] ChraPart #C670-11009, alternative to part# 670-11009-00, NUT, COLUMN connecting column to MS on QP2010 Series - 1/16 (5/PK), Comparable to OEM # 670-11009-00
[G20163-C21045] ChraPart #G20163-C21045, alternative to part# 228-45590-91, SUS Tubing A, Comparable to OEM # 228-45590-91,
[G20163-C21044] ChraPart #G20163-C21044, alternative to part# 228-45590-92, SUS Tubing B, Comparable to OEM # 228-45590-92,
[C228-48826-92] ChraPart #C228-48826-92, alternative to part# 228-48826-92, Stainless Steel Tubing, 0.1mm x 0.8mm x 600 mm, SIL-20A/ACXR (1/PK), Comparable to OEM # 228-48826-92
[G20163-15173] ChraPart #G20163-15173, alternative to Agilent part# 5181-1267, 10µL Standard Syringe, Fixed Needle, 23-26 Gauge
[C221-34618-00] ChraPart #C221-34618-00, alternative to part# 221-34618-00, Syringe, GC, 10uL 0.63 OD, AOC-14/17/20 (1/PK), Comparable to OEM # 221-34618-00
Product
[SI-225-15718-91] Shimadzu, CDL PIPE ASSY
[SI-225-20310-91] Shimadzu, FILAMENT FOR PBI, ROHS
[SI-228-18872-84] Shimadzu, FILTER PACKING ASSY 1PC
[SI-228-18872-84] Shimadzu, FILTER PACKING ASSY 1PC
[SI-228-18872-91] Shimadzu, FILTER, PACKING
[SI-228-35097-05] Shimadzu, GASKET
[SI-220-90418-14] Shimadzu, FERRULE-CAP 0.4MM ID GVF004 10/PKG
[SI-221-41444-01] Shimadzu, GLASS INSERT, SPL-2010
[SI-225-09490-01] Shimadzu, IG GAUGE
[SI-225-09490-01] Shimadzu, IG GAUGE
[SI-225-15877-92] Shimadzu, Corona Needle, LCMS-2020, TQ, QTOF
[SI-201-35584] Shimadzu, RUBBER SEPTUM,INJ.PORT 20/PKT
[SI-201-35584] Shimadzu, RUBBER SEPTUM,INJ.PORT 20/PKT
[SI-220-97808-02] Shimadzu, OIL, 1L ULTRAGRADE 15, E2M1.5
[SI-220-97808-01] Shimadzu, Oil, Rotary Pump, Ultragrade 19, 4L (RV3 & 5)
[SI-220-91239-03] Standards, LCMS, Sensitivity Check LCMS-8030/40/45/50/60, Reserpine 1000pg/uL.
[SI-220-91239-30] Standards, LCMS, Tune Solution, TQ Series, 100mL Volume
Product
[P1720-00245] Robot Coupe 27074 Fine Serrated "S" MFR #: 27074
[ROBOT-39757] LID ASSEMBLY BLIXER 3D
Product
[SI-228-48249-91] Shimadzu, CV IN-SPB D1.588
Product
[G20163-15269] ChraPart #G20163-15269, alternative to Hitachi part# 650-1500, XENON LAMP USHIO UXL 152, 1pk
Product
[OV-ZX4930] OV, 1.5M x 1/4" SS 10% Macrogol 1000R W-HP 80/100 Agilent 68/7890A
Product
[P2623-21436] Fisherbrand™ RS232 Thermal Printer for accumet™ AB and XL Series Benchtop Meters
Product
[8LZ250-0239899] Infochroma AG, Stainless steel migration cell Sieg-Mi-Flex
[8LZ250-0218672] Infochroma AG, Stainless steel central ring
Product
[SGE-18060002] SGE SILANIZED QUARTZ WOOL - 0.5GMS, ea.
Product
[THERMO-035393] Dionex IonPac IC Columns, AS7, 4X250MM
[THERMO-035394] Dionex IonPac IC Columns, AG7, 4X50MM
Product
[SI-221-41444-01] Shimadzu, GLASS INSERT, SPL-2010
Discovery RP Amide C16 - Supleco: L60
• Cột L60 (4-6mm x 25cm, 5um) SL: 1
• tiền cột L60 (4.6mm x 25 cm, 5um) SL: 3
• Cột C18 (100 mm * 4mm, 3hm) SL: 1
• Tiền cột cột C18 (100 mm * 4mm, 3hm) SL: 3
PACKING Spherical, porous silica gel, 10 µm or less in diameter, the surface of which has been covalently modified with alkyl amide groups and endcapped.
L60 BRAND NAME MANUFACTURER
Dicovery RP Amide Supelco
Discovery RP-Amide C16 Supelco
Supelcosil LC-ABZ Supelco